Official Pall channel partner
We are an official channel partner of Pall (Malaysia) Sdn. Bhd., specialising in asset protection — genuine Pall elements with traceability, not grey-market stock.
Pall — USA
Pall process & asset protection filters in Malaysia
Entry Two Resources brings genuine Pall filtration technology to Malaysian industry. As an authorised Pall partner, we help power generation, steel, automotive and general industrial operators protect critical assets with the right lube, hydraulic and process filtration, from specification through to supply and after-sales support.
Checked against your housing
We confirm grade, seal and collapse rating against your housing and duty before we quote, and identify the current equivalent for superseded numbers.
Asset Protection
Clean fluid is the cheapest reliability you can buy
Rotating equipment does not usually fail because a component was badly made. It fails because the fluid around it was dirty. Particulate in a lube or hydraulic system abrades bearings and servo valves; water drives corrosion and strips additives; oxidation products lay down the varnish that causes turbine servo-valve stiction and trips.
Filtration is the cheapest intervention in that chain — an element costs a fraction of an unplanned outage. The difficulty for a Malaysian operator is rarely knowing that; it is getting the right element, to the right island or platform, before the outage window closes.
That is the gap we fill: correct Pall part identification against your existing housing, supply of genuine Pall elements, and installation and purification services to go with it.
Turbine lube oil
Particulate and water in the lube system attack journal and thrust bearings and degrade the oil itself — reduced lubricity, oxidation, acid formation and additive precipitation. Correctly rated elements hold the fluid at its target ISO cleanliness code through the run.
Hydraulic & EHC control fluid
Governor and control systems run tight servo clearances that are unforgiving of contamination. Pressure- and return-line elements keep the fluid clean enough for the valve to move when the control system asks it to.
Varnish & oxidation products
Varnish deposits on oil-wetted surfaces are a leading cause of servo-valve stiction and consequential trips. We supply and operate varnish removal and oil purification equipment as a service, not just the consumables.
Water & gas removal
Oil purifiers strip free and dissolved water and entrained gases from turbine and hydraulic oils, preventing corrosion and extending fluid service life. We have supplied and rented purifier and vacuum dehydrator units to EDRA and TNB stations.
Reservoir breathers
A tank breathes as it heats and cools, and in a tropical climate it draws in humid air every cycle. A correctly specified breather is the cheapest water-ingress control on the plant.
Process & pre-filtration
Depth and pleated cartridges for water, condensate and process streams where the duty is bulk particulate removal ahead of a finer stage or a downstream asset.
Part Number Reference
Pall elements we supply
Grouped by application family. Every part number has its own page with the specification from Pall’s published data and an enquiry form for that part.
On specifications: We publish part numbers, not fabricated specifications. Micron rating, media grade, seal material and collapse rating vary by suffix and are confirmed against your housing and duty before we quote — send us the part number, or the number stamped on the element you are running today, and we will come back with the specification, availability and price.
Application Family
Power Generation
Filtration for turbine lube oil and EHC control fluid systems, reservoir breathers and process duties across gas-fired, coal-fired and combined-cycle plant. These are the part numbers we move most often for the power generation industry in Malaysia.
Pall’s power generation reference ↗Application Family
Lube & Hydraulics
Pressure-line, return-line and lube elements for hydraulic power units, governor and control systems, gearboxes and rotating equipment — offshore and onshore. This is the family behind our recurring supply to the power generation industry in Malaysia.
Pall’s lube & hydraulics reference ↗UE210AP08Z
HC7400SRZ4Z
HC2296FRP18Z50
HC9021FHT4Z
HC9100FRZ8Z
UE610AP20Z
HC8300FRS39Z
UE210AZ13Z
HC9021FHP8Z
UE610AP40Z
Series Guide
What the part-number prefix tells you
Pall part numbers encode the element series in the prefix. These are the families behind the numbers above.
HC
Supralon (replaces Ultipor III / Coralon)
Pall’s current glass-fibre lube and hydraulic elements, rated βx(c) ≥ 2000 (ISO 16889), anti-static and fitted with fluorocarbon seals as standard. The seventh character of the part number is R for standard-collapse or H for high-collapse Supralon.
Supralon replaced Coralon and Ultipor III from 1 October 2023. Send us an older HC part number and we will identify the current Supralon equivalent for you.
Ultipor III and Coralon replaced by Supralon — what changed →
UE
Athalon (formerly Ultipleat SRT)
Coreless laid-over-pleat glass-fibre elements for pressure and return lines, now rated βx(c) ≥ 2000 (ISO 16889). UE210 and UE610 part numbers carried over unchanged when Pall moved the range to the Athalon name.
Send us a legacy UE part number — or a competitor’s element — and we will identify the current equivalent for you.
Ultipleat SRT now supplied as Athalon — what changed →
NXT
Nexis T
Polypropylene depth cartridges with a continuous gradient pore structure, used for process and pre-filtration duties rather than lube and hydraulic service.
PUY
Profile UP
Pleated melt-blown polypropylene depth cartridges rated to a stated removal efficiency, for process water, condensate and chemical streams.
CLR
Claris
General-purpose melt-blown polypropylene depth cartridges with a nominal rating, for economical process and pre-filtration duties.
PFD
PFD reservoir vent filter/dryer
Desiccant filter/dryers that clean and dry the air a reservoir breathes, with a spin-on replacement canister and a sight window.
Entry Two Resources is an authorised channel partner for Pall Corporation products. Product and series names are Pall’s, and the definitive datasheet for any element is the current one issued by Pall.
Product Notices
Superseded and discontinued Pall products
When Pall replaces a range, the part number on your maintenance system can stop being orderable overnight. These notices explain what changed and how we identify the current equivalent.
- Notice
Pall Ultipor III and Coralon elements replaced by Supralon
From 1 October 2023, Pall replaced its Ultipor III and Coralon HC lube and hydraulic elements with Supralon. If your maintenance records still carry an old HC number, this is how to get to the current one.
Read the notice → - Notice
Pall Ultipleat SRT elements now supplied as Athalon
Pall moved its Ultipleat SRT lube and hydraulic elements to the Athalon name from 1 October 2023. For the UE210 and UE610 elements, the part number did not change — the element behind it got better.
Read the notice → - Notice
Pall 8300 Series filter housings replaced by Ultipleat UR619
Pall has discontinued the 8300/04/10/14 Series filter assemblies and is replacing them with the Ultipleat UR619. Elements for 8300 housings already in service remain available.
Read the notice →
Beyond Supply
Purification and installation, not just consumables
We supply, rent and operate Pall oil purifier and vacuum dehydrator units, run varnish removal services on turbine lube systems, and carry out the installation and retrofitting work that goes with them — offshore and on site.
Installation & retrofitting services →Send us a part number — or the one stamped on your element
We will identify the current Pall equivalent, confirm the specification against your housing and duty, and quote it with price and availability. Or call +603 8603 1318.