Official Pall channel partner
We are an official channel partner of Pall (Malaysia) Sdn. Bhd., specialising in asset protection — genuine Pall elements with traceability, not grey-market stock.
Pall — USA · Power Generation
NXT10010UM18F Nexis T depth filter cartridge, 100 µm
Entry Two Resources is an official channel partner of Pall (Malaysia) Sdn. Bhd., specialising in asset protection filtration for the oil & gas and power generation industries.
Overview
Pall NXT10010UM18F
A Pall Nexis T melt-blown polypropylene depth cartridge in the 100 µm grade and 10-inch length, with a flat closed end and external 222 O-ring (the M18 fitting). Its graded pore structure does pre- and final filtration in one cartridge, which makes it a bulk-particulate stage for process water, condensate and chemical streams rather than a lube or hydraulic element.
Elements in this family serve turbine lube oil and EHC control-fluid systems, reservoir breathers and process duties across gas-fired, coal-fired and combined-cycle plant — the part numbers we move most often for the power generation industry in Malaysia.
Current Pall part number
The Nexis T series is current and Pall states no supersession for it.
Specifications
Pall NXT10010UM18F specification
Taken from Pall’s own published data — each value is numbered to the document it came from. Anything not listed is confirmed against your housing and duty when you enquire.
| Series | Pall Nexis T[1] |
|---|---|
| Removal rating | 100 µm grade, 90% removal efficiency at the rated size (single-pass test based on ASTM F-795)[1][2] |
| Filter medium and hardware | Polypropylene throughout — no adhesives, binders, resins or silicone[1] |
| End fitting | M18 — single open end, flat closed end, external 222 O-ring[3] |
| O-ring material | F — FEP-encapsulated fluorocarbon elastomer[3] |
| Nominal dimensions | 254 mm (10 in) long, 64 mm (2.5 in) OD[2] |
| Maximum differential pressure | 1.72 bar(d) / 25 psid at 60 °C; 3.45 bar(d) / 50 psid at ambient. Recommended change-out at 2.4 bar(d) / 35 psid[1] |
Please note: Pall’s own listing for this exact part number was unavailable when we checked. The values above come from Pall’s Nexis T datasheet and from Pall’s listings for the same grade, length, end fitting and seal code.
Reading the part number
How Pall’s ordering code breaks down for NXT10010UM18F[1][3].
| Code | Meaning |
|---|---|
| NXT | Nexis T cartridge |
| 100 | Filtration grade — 100 µm |
| 10 | Nominal length, 10 in |
| M18 | Single open end, flat closed end, external 222 O-ring |
| F | FEP-encapsulated fluorocarbon O-rings |
Sources
- Pall — Nexis T filter cartridges data sheet (FBNEXTEN) ↗
- Pall Shop — Nexis T NXT10010UM18V884 (same 100 µm grade and 10 in length) ↗
- Pall Shop — Nexis T NXT5010UM18F (same M18 end fitting and F seal) ↗
Product and series names are Pall’s, and the definitive datasheet for any element is the current one issued by Pall. Published values were retrieved on 30 September 2026.
Series
Nexis T
Polypropylene depth cartridges with a continuous gradient pore structure, used for process and pre-filtration duties rather than lube and hydraulic service.
All Pall series we supply →Why Entry Two Resources
Buying Pall NXT10010UM18F in Malaysia
Checked against your housing
We confirm grade, seal and collapse rating against your housing and duty before we quote, and identify the current equivalent for superseded numbers.
Power Generation
Other Pall elements in this family
Enquire Now
Request a quotation for Pall NXT10010UM18F
Tell us the quantity and where it needs to be delivered. We will confirm the specification against your housing and come back with price and availability.
Or call +603 8603 1318